The hose you left connected is the most expensive thing in your yard right now. Water trapped in a hose bib has nowhere to go when it freezes, and the pipe behind it splits before the ground does. Getting an Idaho home ready for winter takes most homeowners a Saturday or two, spread across late September through early November. The work below is ordered so the water and the heat get handled first.
Why the calendar matters more here than the thermometer
Idaho's fall is a trap of pleasant afternoons. A sunny 68°F day in Meridian says nothing about the 24°F night coming three weeks later, and the Treasure Valley's freeze dates swing widely from year to year. At the Boise station, NWS Boise's 1991–2020 normals put the median first freeze at 32°F around Oct. 18, with a 10%–90% range running from late September to early November. The median first hard freeze at 28°F arrives around Nov. 7.
Those are medians, not promises. Nampa's station medians run several days earlier than Boise's, and homes at higher elevation in the foothills or out toward Star can drop below freezing while the valley floor stays above it. Treasure Valley irrigation crews make the same point from the other direction: hard freezes have hit as early as the middle to the end of October.
So build the schedule around the early edge of the range, not the middle of it. If the work is done by the end of the third week of October, an unusually early cold snap costs you nothing.
Prerequisites: one Saturday, plus a second for the optional items. You'll need work gloves, a hose reel or storage bin, a replacement furnace filter sized to your unit, and a ladder for gutters (hire that one out if the roofline is steep). Budget for a professional sprinkler blowout, priced by the number of zones on your system, and a furnace service call. Skill level: homeowner-basic, with a pro for anything on the roof or behind a panel.
Step 1: Get the sprinklers blown out
Shutting off the timer does not remove the water already sitting in the lateral lines and the backflow preventer, and that standing water is what cracks pipe, valves and heads. A professional blowout uses compressed air to push it out. Treasure Valley companies run commercial tow-behind compressors rated around 185 cubic feet per minute for the job, and they schedule first come, first served by zip code.
Book it in mid-September to early October. That is the window irrigation crews recommend, because a hard freeze can land between the middle and end of October and the schedule fills up fast once the forecast turns. If you are late and a freeze is coming, the backflow preventer is the exposed component most likely to break first — many Boise and Meridian homes do not even have a blowout tee, which means the tech has to push air through the backflow itself.
If you plan to do it yourself, you need a compressor large enough to move real volume, and you need to open each zone's valves manually at the valve boxes rather than from the controller. Set the controller to off or rain until spring.
Success check: all zones have blown air only, the backflow has been drained, the outdoor supply valve is closed, and the controller reads off.
Step 2: Disconnect the hoses and drain the hose bibs
A frost-free hose bib only protects itself when the hose is off. The spigot sits at an angle inside the wall so residual water drains back into the heated house — but a hose screwed on traps that water in the exposed fitting, where it freezes and splits. The American Red Cross recommends removing, draining and storing outdoor hoses, closing the inside valves that supply those hose bibs, then opening the outside bibs to let them drain. Leave the outside valve open so any water still in the pipe can expand without breaking it.
While you are at each spigot, look for drips and corrosion. A bib that leaks in October is a bib that has already told you it needs replacing. For any exposed pipe in the garage, crawl space or against an exterior wall, the Red Cross points to pipe sleeves or UL-listed heat tape as the practical fixes.
One thing not to do: the Red Cross specifically warns against putting antifreeze in water supply or sprinkler lines unless the manufacturer directs it, because it is harmful to people, pets, wildlife and landscaping.
Success check: every hose is drained and stored indoors, the inside shutoffs are closed, and the outdoor bibs are open with no water dripping.
Step 3: Clear the gutters once the leaves are down
Cleaning gutters in early October in the Treasure Valley is wasted work — the cottonwoods and maples are still dropping. Wait until most of the leaves have fallen, then clear the runs and confirm the downspouts are open and dumping water well away from the foundation.
Why it matters more than it looks: a clogged gutter sends water over the back edge and down the fascia, and pooled water at the foundation is how you get a wet basement corner in February. Boise's freeze-thaw cycles make it worse. Water that backs up and refreezes in a gutter forms ice dams at the roof edge, and that ice pushes meltwater under shingles.
While you are up there, check for sagging runs, loose hangers and separated joints. If the roofline is steep or more than a single story, hire it out. A fall from a ladder is the most common way a weekend chore turns into a hospital visit.
Success check: water poured into the top of a downspout exits at the bottom, and the ground around the foundation is dry.
Step 4: Run the furnace before you need it
Turn the thermostat to heat on a mild afternoon and let the system run a full cycle. You want to hear the burners light, feel warm air at the registers and confirm the blower shuts off cleanly — on a day when you can still call someone.
Change the filter at the same time. A clogged filter is the cheapest cause of a no-heat call and the one most often overlooked; check the size printed on the old filter's frame and match it exactly. If the unit is due for annual service, book it now, before the first cold snap fills every HVAC company's schedule.
Success check: the furnace runs a complete heat cycle, the new filter is seated with the airflow arrow pointing toward the unit, and a service appointment is on the calendar if one is due.
Step 5: Have the fireplace inspected before the first fire
The flue has one job: move combustion gases out of the house. Creosote in that flue is fuel, and a blockage is a carbon monoxide path. The published standard, quoted from NFPA 211 by the Chimney Safety Institute of America, is an inspection at least once a year for soundness, freedom from deposits and correct clearances — and it happens before you burn, not after.
Why the annual visit matters even in a mild-weather household: animals nest in flues and masonry deteriorates whether you light fires or not. CSIA's cleaning trigger for a masonry fireplace is 1/8 inch of sooty buildup, sooner if the deposit has glazed shiny. Glazed creosote is a professional problem, not a brush-and-hope job.
Ask your sweep which inspection level they are performing. A Level I visual check covers routine annual service; a Level II adds a video scan of the flue and is what applies after a chimney fire, a fuel change or a property sale. A gas fireplace still needs the manufacturer's recommended service, and it shares the blockage risk.
While the sweep is there, test every smoke and carbon monoxide alarm in the house.
Success check: you have a written inspection record dated this fall, the damper opens fully, and every alarm chirps when tested.
Step 6: Walk the exterior before the weather closes in
Two exterior jobs belong on the same pass, because both need dry weather and both get harder once snow is on the roof. First, look at the roof from the ground — missing shingles, lifted flashing, granules in the gutter, anything that reads wrong. If you have seen a ceiling stain or had a small leak, get it looked at now; a repair in November is a fraction of the cost of a repair after a January thaw finds its way inside.
Second, look at the trees. Branches touching the roof or hanging over the house are a snow-load and wind problem, and a qualified arborist should assess anything large enough to damage the structure if it comes down.
Drafts get handled here too. On a chilly evening, stand at each exterior door and window. If you feel moving air, check weatherstripping, door sweeps and caulking. Start with the doors your household actually uses every day, because those gaps do the most damage to your heating bill.
Success check: you have a written list of roof, tree and draft issues, each marked either handled or booked with a pro.
Step 7: Find the main water shutoff and put the patio to bed
Before anything else on this step: locate the main water shutoff and confirm you can turn it without moving a car, a shelf or a stack of bins. If a pipe lets go in January, you have minutes, not hours, and the difference between a wet floor and a flooded basement is how fast that valve closes. Show a second adult in the house where it is. If you travel in winter, the Red Cross advises leaving the heat on and set no lower than 55°F while you are gone.
Then finish the outdoor items. Clean and cover patio furniture, store cushions somewhere dry, and secure anything light enough to become a projectile in a Treasure Valley windstorm. Drain and store garden equipment per the manufacturer's instructions. Walk the yard for anything that holds water — planters, birdbaths, decorative fountains — because those crack when the water inside them freezes and expands.
Finally, stage the winter gear. Shovel, ice melt appropriate to your surfaces and a good doormat go somewhere you can reach in slippers. Run the snowblower now, with fuel, while the driveway is still bare.
Success check: the shutoff turns freely, the patio is covered and stored, and the shovel and ice melt are staged at the door.
What a Realtor notices in a November walkthrough
The order above is deliberate. Water and heat failures cause structural damage; gutters and drafts cost you comfort and money. When I walk a Meridian or Eagle home in late fall, the winterization items that show up in inspection reports are almost always the ones nobody wrote down: a hose bib with a hairline crack, a disconnected downspout dumping at the foundation, a furnace filter that has not been changed since the house was listed.
If you are selling this winter, finish this list before photos and showings. Buyers notice a house that feels cold at the front door, and an inspector will find the rest.
1What if I miss the sprinkler blowout window?
It is not ideal, but it is not automatic failure either. The backflow preventer is the exposed part that breaks first, so irrigation companies publish quick-drain instructions that buy you time until a crew can get out. Draining the backflow is a stopgap, not a substitute for a full blowout — the lateral lines still hold water.
2My system is self-draining — do I still need a blowout?
Do not trust it alone. Automatic drains clog and shift as the ground settles, which is a particular problem on newer construction and lots with growing trees. Treat a self-draining system as a backup, not a reason to skip the blowout.
3Why did my frost-free hose bib still crack?
A frost-free hose bib drains back into the house through the wall only when the hose is removed and the inside shutoff is closed. A hose left attached traps water in the exposed fitting, which is exactly where freeze damage happens. Remove the hose, then open the outside bib so the remaining water can drain out.
4A pipe froze anyway — what do I do first?
Turn the faucet on. A trickle instead of full pressure points to a frozen section, usually against an exterior wall or where the service line enters through the foundation. Keep the faucet open and warm the pipe with an electric heating pad, a hair dryer or towels soaked in hot water — never a blowtorch, kerosene heater or other open flame. If you cannot reach the frozen section, call a licensed plumber.
5Is it cheaper to skip the blowout and repair later?
Often, yes. Water left in the lateral lines or the backflow preventer freezes, expands and splits components, and irrigation companies report that spring repair work frequently costs nearly as much as a new system. If the system was never blown out, have it pressure-tested in spring before you turn the water on.
No comments yet. Be the first to share your thoughts!